Product ID:9970 BLACK WRINKLE FINISH
MSDS Date:11/05/1996
FSC:8010
NIIN:00-530-8380
MSDS Number: CDCJC

DEL PAINT CORP

3105 E RENO AVE
OKLAHOMA CITY, OK 73106-6699
US

Emergency Phone: 405-692-7269/405-672-1431

Info Phone: 405-672-1431/800-866-6823

Cage: EO523

DEL PAINT MFG

OKLAHOMA CITY, OK 73117 US

Telephone: 405-672-1431

Cage: 39934

STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: 20-30%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE *96-4*

CAS: 64742-89-8

Fraction By Weight: 10-20%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM

HEXONE, METHYL ISOBUTYL KETONE (MIBK), 4-METHYL-2-PENTANONE

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 2.34%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

COATING & MATERIAL 3.33 LBS/GAL

RTECS: 9999999VO

LD50 LC50 Mixture:ORAL LD50(RAT): 25 ML/KG MINERAL SPIRITS
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE & THROAT IRRITATION,
CNS DEPRESSION. SKIN: IRRITATION, DERMATITIS & LIQUID CAN BE
ABSORBED. EYES: IRRITATION. INGESTION: MOUTH, THROAT, ESOPHAGUS &
STOMACH IRRITATION. REPEATED/PROLON GED OCCUPATIONAL OVEREXPOSURE
TO SOLVENTS MAY CAUSE PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DIZZINESS, BREATHING DIFFICULTY,
HEADACHES, LOSS OF COORDINATION, DEFATTING, TEARING, DISCOMFORT,
REDNESS, BLURRED VISION, NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN &
RESPIRATORY DISORDERS.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: IMMEDIATELY FLUSH
W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: THOROUGHLY WASH W/SOAP
& WATER. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION
IN ALL C ASES.

Flash Point:<100F
Lower Limits:0.7
Upper Limits:6
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SCBA & FULL PROTECTIVE EQUIPMENT. WATER
SPRAY MAY BE INEFFECTIVE. WATER MAY BE USED TO COOL CLOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLOSIVE MIXTURE IN AIR
BETWEEN LOWER & UPPER EXPLOSIVE LIMITS.

Spill Release Procedures:REMOVE IGNITION SOURCES. AVOID BREATHING
VAPORS. VENTILATE AREA. CONTAIN & REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS. KEEP OUT OF SEWERS.

Handling and Storage Precautions:KEEP AWAY FROM IGNITION SOURCES. KEEP
CONTAINERS TIGHTLY CLOSED & UPRIGHT WHEN NOT IN USE. STORE IN COOL,
WELL VENTILATED APPROVED AREAS.
Other Precautions:AVOID FREE FALL OF LIQUID >A FEW INCHES & GROUND
CONTAINER WHEN POURING. USE NON-SPARKING UTENSILS WHEN HANDLING.
HANDLE AS IGNITABLE LIQUID. DON'T TAKE INTERNALLY. EMPTIED
CONTAINERS MAY RETAIN HAZAR DOUS RESIDUE & EXPLOSIVE VAPORS.

Respiratory Protection:WEAR AN APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING THE USE OF THIS PRODUCT UNTIL VAPOR &
MISTS LEVELS ARE Ventilation:GENERAL CLEAN AIR DILUTION/LOCAL EXHAUST IN VOLUME &
PATTERN TO KEEP AIR CONTAMINATE CONCENTRATION Protective Gloves:CHEMICAL/SOLVENT IMPERMEABLE
Eye Protection:REQUIRED
Other Protective Equipment:SAFETY GLASSES W/SPLASH GUARDS/SIDE SHIELDS,
CHEMICAL GOGGLES, FACE SHIELDS, EYEWASH STATION, EMERGENCY SHOWER,
HEAD CAP
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. WASH THOROUGHLY AFTER HANDLING. SMOKE IN DESIGNATED
AREAS.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING CONTENTS
MAY BE HARMFUL/FATAL. NEVER USE WELDING/CUTTING TORCH ON/DEAR DRUM
(EVEN EMPTY) BECAUSE IT CAN IGNITE EXPLOSIVELY. KEEP OUT OF REAC H
OF CHILDREN. DON'T BREATHE VAPORS/SPRAY MIST. AVOID CONTACT W/EYES,
SKIN & CLOTHING. USE OF PROTECTIVE CREAMS ADVISED.

Boiling Pt:B.P. Text:237-307F
Vapor Density:>1
Spec Gravity:1.05
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:LIQUID W/ALIPHATIC ODOR.

Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS, OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, CORROSIVE ATMOSPHERE, POOR
VENTILATION, EXCESSIVE AGING & OTHER IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION/COMBUSTION: CO &
CO2.

Waste Disposal Methods:COLLECT ABSORBENT/SPILLED LIQUID INTO METAL
CONTAINERS. DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
DON'T INCINERATE CLOSED CONTAINERS. INCINERATE IN APPROVED
FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.